Mastering CNC Machining Centers Updater - version 1.5 to 1.5.4
------------------------------------------------------------
Name: Mcm_154.exe
Size: 3,679 kb
Date: 3/31/2004
Type: 32-bit Windows executable file. (Windows 95, 98, ME, NT, 2000, XP.)

Who Should Use This Updater:
----------------------------
  It is strongly recommended that ALL users of Mastering CNC Machining Centers 
version 1.5. Look at the Course CD-ROMs to determine your version number. 
Download this file and run it on all computers where MCM 1.5 is 
installed. If you are running the original version 1.0 of Mastering CNC 
Machining Centers, DO NOT run this installer.

IMPORTANT: If you are running a floating license, DO NOT run this installer on your server.  
Only run this file on your client computers.

Description:
------------
  This updater provides the following problems:

---Version 1.5.4:
   * More frequent updates of student data files.
(Corrects problems on a few networks where traffic load or network speed 
interferes with timely data updates.)
   * Course 1 Lesson 4 Question 8.
This question accepted EDIT MODE as a mode for running a part program. EDIT MODE 
is no longer a correct answer.
   * Course 2 Lesson 4 Questions 29-32, 34.
A more accurate Mazatrol part program is used for these questions.
   * Course 4 Lesson 6 Question 27.
This Mazak question accepted an incorrect answer (Tool File). The correct answer 
is Tool Data.
   * Course 5 Lesson 2 Question 40.
This jog-the-tool question was difficult to answer correctly. This has been 
fixed.
   * Course 5 Lesson 3 Question 36.
This question accepted an incorrect answer. The correct answer is: the arrow 
between the two lines of the pattern.

---Previous updates (1.5.1 through 1.5.3) included with this version:
   -Incorrect answer judgement by two questions:
   * Course 4 Lesson 5 Question 34 Part 3, and 
   * Course 5 Lesson 2 Question 27
These questions involve dragging an object on screen to a specific location. The 
questions would not accept the proper location as a "correct" answer.
This updater corrects that problem.

   -Invalid values in Time Report
Under certain conditions, the Lesson Span in the Time Report was shown as a 
negative number.
This updater corrects that problem.

   * Course 5 Lesson 6 Question 19
A problem with the answer screen in Course 5, Lesson 6, Question 19 has been 
fixed. The problem was caused by the question not being reset before proceeding 
to the next question.

   * Course 4 Lesson 5 Question 10 Part 5
The Fanuc soft key menu did not display properly on this question when the 
monitor was set to greater than 256 colors. This has been fixed.

  Both the MCM program and the Independent Course Manager for MCM are updated.


Instructions:
-------------
  To install this updater, simply download the file "Mcm_154.exe". Copy the file 
onto the computer on which MCM is installed. If you are using floating licenses, 
download and run on the student workstations. This updater is NOT REQUIRED on 
the license server computer.
Then use the Windows "Run" command, or double-click the file icon to execute the 
program. Follow the on-screen prompts and instructions to perform the update.

  This updater CAN be used over a network to update multiple computers from a 
single location. Run the updater, then select "Manual" updates to allow you to 
select installations on network drives.

Copyright (c) 2004, V-TIP, Inc.
All Rights Reserved