(Click to Return)

Q Number Location & Type

Course 4 Lesson 3: Student Guide Answers

Related Scene

49 Part 2 FO

With the program text displayed, what are the steps required to edit coordinates into a G92 block on a Fanuc 0 to 18M?

132

1. Set EDIT LOCK to OFF. 2. Select the EDIT mode. 3. Move the cursor to the coordinate to edit. 4. Enter the new value. 5. Press ALTER. 6. Set Edit Lock to ON.

50 Part 2 FO

With the cursor at the beginning of a program, what steps are required to use the SEARCH function to locate the next X axis coordinate on a Fanuc 0 to 18M?

139

1. Enter X on the MDI panel. 2. Push CURSOR DOWN button.

51 Part 2 M

When working with an EIA program on a Mazak that uses the G92 code, what steps are performed in Zeroing the grid before dialing-in the Set Point?

152

1. Home the machine. 2. Enter Zero on the MDI keypad. 3. Press INPUT.

Type Key: (blank) = General; AF=All Fanuc; F0 = Fanuc 0, 16, 18, & 21M; F10 = Fanuc 10, 11, 12, & 15M; O = Okuma; M = Mazak